Airblade™ technology in a tap. The...
Airblade™ technology in a tap. The Wash+Dry replaces the Tap and is 35% quieter.
Wash and dry hands at the sink.
5 years guarantee.
Available in 3 product types:
- Short, Long, Wall
Warning: Last items in stock!
|Material(s)||Stainless steel (brushed)|
|Electrical Specifications||220V - 240V / 50Hz / 1600W|
|Motor type||Dyson digital motor. Switched reluctance brushless.|
|Air velocity||430 mph|
Dyson Airblade Wash+Dry hand dryer / faucet combination. Model Tap WD04, Tap WD05, Tap WD06. This innovative hand dryer allows hands to be dried without moving from the sink. Not only does this save wall and floor space by integrating the hand dryer and the tap, but it also eliminates drips on the walls and floors since the user stays in one place and the drain captures all water as it comes off of the hands.
The Dyson Airblade Wash+Dry strips water off your hands and into the sink in about 12 seconds. The new V4 motor is located under the sink and is quieter than other high speed hand driers. The Tap includes a HEPA filter, removing 99.9% of bacteria and viruses in the air.
The Dyson Airblade Wash+Dry can be configured as a traditional tap that rises from the back of the basin or as a tap that protrudes from the wall over the sink.
WD04 Unit Dimensions (mm)
159 H x 295 W x 281 D
WD04 Packaged Dimensions
303 x 284 x 286
The Dyson Air blade Wash+Dry WD04/05/06 hand dryer comes in a stainless steel (brushed) material. The Dyson model code is 245265-01 for the WD04, 245269-01 for the WD05, and 245266-01 for the WD06.