Xlerator ECO Efficient 500W Hand Dryer XL-BW-ECO

The XLERATOReco® hand drier is the latest version of the premier high-speed hand dryer, a VERY ENERGY EFFICIENT format. Only 500 Watts. Dries Hands in 15 s.

Its ‘No Heat’ technology with only 500 watts of energy dries hands in 15 seconds, setting a new standard in hand-drying efficiency and sustainability.

The new XLERATOReco hand dryer is the most energy-efficient and environmentally friendly hand dryer on the planet.

 NEW ENHANCED FEATURES 

- Motor speed and sound control: Adjust to have the best balance between the dry time and the noise level

- Sensor control: Adjust to control how close hands are before the dryer activates. 

- Easily visible LED Diagnostic for Easy Maintenance: Without opening the cover, a complete list of troubleshooting codes is visible and listed in the provided owner's manual.

• ‘No Heat’ technology, uses only 500 watts of energy.
• Fast, dries hands completely in 15 s and promotes hygiene.
• Energy-efficient, uses 80% less energy than traditional hand dryers and is a source reduction alternative. Reduces the carbon footprint.
• GREENSPEC® Listed and Helps Qualify for LEED® credits.
• Even more economical thanks to its low power consumption, 95% costs saving over paper towels. Read our analysis Hand dryers or paper towels? .
• Installation of multiple units on one 20 Amp circuit, significantly reducing installation costs.
• Made in USA Certified.
  

Cost Comparison between paper towels and hand dryers for 1 000 uses.

Source Excel Dryer, for more details, see the link below.

Cost Savings Analysis : Calculate your Facilities Savings vs. Paper Towels

Robustness and sharp design with its one-piece case, it is a must for all restrooms! Especially suitable for sport clubs, concert halls, stadiums and event public places.

The Xlerator XL-BW-ECO features a white thermoset polymer cover.  It is the least expensive Xleratoreco® model.  The white cover is very durable and matches most white W.C.

Note: Without a heating element, the XleratorECO is extremely energy efficient. It will, however, be colder than the regular Xlerator hand dryer and, therefore, not as comfortable. However it is still almost just as effective.

If these hand dryers are too cold for you, you can also purchase the regular Xlerator hand dryer with heating element.

Learn more about Xlerator Green certifications in our Downloads section.

Specifications

• White Thermoset BMC cover
• No Heat technology, uses only 500 watts
• Dries Hands in 15 Seconds
• Noise reduction nozzle included (minus 9 dB by reducing air deflection noise)
• Uses 80% Less Energy than conventional hand dryers
• 95% Cost Savings vs. Paper Towels utilisation
• GREENSPEC® Listed and Helps Qualify for the LEED® credits.
• 5 year warranty

Dimensions

• Dimensions : H 322 x W 298 x D 170 mm
• Weight : 7.26 kgs

Construction

• The cover will be fastened to a base plate by two chrome plated tamper-proof bolts.
• The hand drier base plate shall be equipped with (3) 7/8" (22 mm) diameter holes.
• All internal parts coated according to Underwriters' Laboratories, Inc. requirements.
• Entire mechanism is internally grounded.

Mechanism

• Hand drier motor shall be a thermally protected, series commutated, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) and provides air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4 inches [102 mm] below air outlet).
• The control assembly is activated by an infrared optical sensor in the hand drier next to the air outlet. The hand dryer shall operate as long as hands are located under the air outlet. There is a 35-second lockout if hands are not removed.

Quantity recommendations

One drier for every two washbasins is normally sufficient. If restroom traffic is unusually heavy, we recommend one dryer per washbasin in small W.C. and two driers for every three washbasins in larger ones.

Mounting Diagram

Enhanced product line with new standard features

Sensor control

Adjust to control how close hands should be
   before the dryer activates. 

Motor speed and sound control

Adjust to create the preferred balance between
   dry time and noise level

Easily Visible LED Diagnostic for Easy Maintenance

Now it's easy to monitor your
   XLERATOR without even opening the cover!
   A complete list of troubleshooting codes
   is listed in the provided owner's manual.