Xlerator Hand Dryer XL-SB

Xlerator Brushed stainless steel cover.

Feel the Power! Promote hygiene.

High-speed and energy-efficient.

Environmentally friendly.

More details

XL-SB

789,00 € tax excl.

954,69 € tax incl.

In stock!

Drying time10-15 s
ActivationAutomatic
Material(s)Brushed stainless steel - beautiful and durable
Electrical SpecificationsWatts: Max 1400 / Volts: 220-240 / Amps: 6.5 / Hertz: 50-60
Motor typeBrush
RPMs20000
Motor watts460 W
Timed shut-off2 Seconds after hands are removed.
Cover screwsTamper Proof
Warranty5 years
Air velocity16,000 Linear Feet per Minute
Motor horse power5/8
Heating elementAdjustable 0-1030 Watts
Air temperature increase35°C
Safety automatic shutoff35 seconds
Product CertificationsGREENSPEC Approved
DimensionsH 322 x W 298 x D 170 mm

The Xlerator hand dryer is the original high speed hand dryers with a patented technology. Designed and manufactured in the USA, it is powerful, energy efficient and durable.

 NEW ENHANCED FEATURES 

- Motor speed and sound control: Adjust to create the best balance between dry time and noise level

- Heat control: Adjust to control heat level for the most comfortable dry and the best balance with energy efficiency and costs saving. High, medium, low and off.

- Sensor control: Adjust to control how close hands are before dryer activates. 

- Easily Visible LED Diagnostic for Easy Maintenance: Without opening the cover! A complete list of troubleshooting codes is listed in the provided owner's manual.

 

  • It needs 10-15 s to dry hands completely and it promotes hygiene.
  • Uses 80% less energy than conventional hand dryers, thanks to its powerful motor.
  • Costs and sustainability compare to paper towels: a study from Quantis, an international life cycle assessment research firma shows that electric hand dryers are a better choice than paper just on the basis of energy use alone, without even considering the many other environmental impacts of the manufacture and disposal of paper.

 

The stainless steel cover is the best and the most durable cover option available for the Xlerator hand dryer.  Brushed stainless steel matches the stainless steel look of many restrooms.  It hides finger prints, particularly when compared to polished stainless or chrome.  And it is the most vandal resistant option.

Made in the USA.

 

Xlerator XL-SB hand dryer in restrooms

Cost Savings Analysis : Calculate your Facilities Savings vs. Paper Towels. See the document in the downloads section.

 

greenspec_banner

 

Specifications

  • Brushed stainless steel
  • Automatic hand dryer
  • Dry Hands Completely in less than 15 Seconds
  • Noise reduction nozzle included (lowers decibel level 9 dB by reducing air deflection noise)
  • 80% Less Energy than conventional hand dryers
  • 95% Cost Savings versus Paper Towels
  • GREENSPEC® and Helps Qualify for LEED® credits.
  • 5 years limited warranty

 

Dimensions

  • Dimensions : H 322 x W 298 x D 170 mm
  • Weight : 7.26 kgs

 

Construction

  • The cover is fastened to a base plate by two chrome plated tamper-proof bolts.
  • The hand drier base plate shall be equipped with (3) 7/8" (22 mm) diameter holes.
  • All internal parts coated according to Underwriters' Laboratories, Inc. requirements.
  • Entire mechanism is internally grounded.

 

Mechanism

  • Hand drier motor shall be a thermally protected, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) and provides air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands level (4 inches [102 mm] below air outlet).
  • The heating element (970 w) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which opens whenever air flow is cut off and closes when flow of air is resumed.
  • The control assembly is activated by an infrared optical sensor located in the hand drier next to the air outlet. The hand dryer operates as long as hands are under the air outlet. There is a 35 s lockout feature if hands are not removed.

 

Quantity recommendations

One drier for two washbasins is normally sufficient. If the traffic is unusually heavy in the restroom, one dryer per washbasin is recommended in small installations and two dryers for three washbasins in larger ones.

 

 

Xlerator Dimensions

Xlerator new features

Enhanced product line with new standard features

Heat control

Adjust to control heat level for the 
most comfortable dry. High, medium, low and off.

Sensor control

Adjust to control how close hands are
before dryer activates. 

Motor speed and sound control

Adjust to create the best balance between
dry time and noise level

Easily Visible LED Diagnostic for Easy Maintenance

Now it's easy to monitor the health of your
XLERATOR without even opening the cover!
A complete list of troubleshooting codes
is listed in the provided owner's manual.

 

4 similar products: