Xlerator Hand Dryer XL-C

Xlerator Chrome plated hand dryer with design zinc cover.

High-speed, dries hands in 10 to 15 s. Energy-efficient!

Economical, sustainable.

Save time, save energy, save money!

More details

XL-C

829,00 € tax excl.

1 003,09 € tax incl.

In stock!

Drying time10-15 s
ActivationAutomatic
Material(s)Chrome plated
Electrical SpecificationsWatts: Max 1400 / Volts: 220-240 / Amps: 6.5 / Hertz: 50-60
RPMs20000
Motor watts460 W
Timed shut-off2 Seconds after hands are removed.
Cover screwsTamper Proof
Warranty5 years
Air velocity16,000 Linear Feet per Minute
Motor horse power5/8
Heating elementAdjustable 0-1030 Watts
Air temperature increase35°C
Safety automatic shutoff35 seconds
Product CertificationsGREENSPEC Approved
DimensionsH 322 x W 298 x D 170 mm

The Xlerator hand dryer by Excel Dryer is the original and premier high-speed hand drier. Very powerful, it is also economical and energy-efficient.

Upgrade your restrooms today with the world’s number one high-speed, modern and energy efficient hand dryer. For use in all restrooms where high standards are important!

 NEW ENHANCED FEATURES 

- Motor speed and sound control: Adjust to choose the best balance between drying time and noise level

- Heat control: Adjust the heat level for the most comfortable dry and the best balance between energy efficiency and costs saving. High, medium, low and off.

- Sensor control: Adjust the distance how close hands are before dryer activates. 

- Easily Visible LED Diagnostic for Easy Maintenance: Without opening the dryer, have a complete list of troubleshooting codes is listed in the provided owner's manual.

 

  • Very fast, dries hands in 10-15 seconds and improves hygiene.
  • Sustainable, uses 80% less energy than conventional handdryers.
  • Economical, provides 95% cost savings vs. paper towels by eliminating paper towel cost, maintenance and waste, with a less than one year payback.
  • GREENSPEC® Listed and Helps Qualify for LEED® credits.

 

The Xlerator's speed, key factor in the efficiency of a hand dryer, uses a patented technology designed with a high-velocity air stream and nozzle that completely eliminates water droplets.

Robustness and sharp design with its one-piece case, the Xlerator hand dryer is very popular in restaurants, clubs, concert halls, stadiums and event public places.

The XL-C Xlerator hand dryer comes with a polished chrome-plated cover on a zinc die-case metal base.  The shiny, mirror-like finish matches the bright look of many W.C.

Xlerator hand dryer XL-C

 

Cost Savings Analysis: Calculate your Facilities Savings vs. Paper Towels

Read about our analysis: Hand dryers or paper towels?

 

greenspec_banner

 

Specifications

  • Chrome plated zinc cover
  • Automatic
  • Dries Hands Completely in 10 to 15 Seconds
  • Noise reduction nozzle included (lowers decibel level 9 dB by reducing air deflection noise)
  • Uses 80% Less Energy than conventional hand dryers
  • 95% Cost Savings versus Paper Towels
  • GREENSPEC® Listed and Helps Qualify for LEED® credits.
  • 5 year limited warranty

 

Dimensions

  • Dimensions : H 322 x W 298 x D 170 mm
  • Weight : 7.26 kgs

 

Construction

  • All covers will be fastened to a base plate by two chrome plated tamper-proof bolts.
  • The hand drier base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, and the bottom one is suitable for use with surface conduit.
  • All internal parts coated according to Underwriters' Laboratories, Inc. requirements.
  • Entire mechanism shall be internally grounded.

 

Mechanism

  • Hand drier motor shall be a thermally protected, series commutated, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) and provides air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4 inches [102 mm] below air outlet).
  • The heating element (970 w) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which opens whenever air flow is cut off and closes when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
  • The control assembly is activated by an infrared optical sensor located in the hand drier next to the air outlet. The hand dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.

 

Quantity recommendations

One drier for every two washbasins is normally sufficient. If restroom traffic is unusually heavy, we recommend one dryer per washbasin in small installations and two dryers for every three washbasins in larger ones.

 

Cost Savings Analysis : Calculate your Facilities Savings vs. Paper Towels

 

Xlerator Dimensions

 

Xlerator new features

Enhanced product line with new standard features

Heat control

Adjust to control heat level for the 
   most comfortable dry. High, medium, low and off.

Sensor control

Adjust to control the distance hands are
   before dryer activates. 

Motor speed and sound control

Adjust to create the best balance between
   drying time and noise level

Easily Visible LED Diagnostic for Easy Maintenance

Now it's easy to monitor your
   XLERATOR without even opening the cover!
   A complete list of troubleshooting codes
   is listed in the provided owner's manual.

 

4 similar products: